[Info-ingres] Ingres Installation

[Rich Ford]

On Friday, 3 December 2021 at 08:08:10 UTC-8, Paul Mason wrote:
> You mentioned the rpm saveset - 
> 
> actianx-11.1.0-100-com-linux-rpm-x86_64-15692 
> 
> that doesn't use ingbuild, that would be the other saveset - 
> 
> actianx-11.1.0-100-com-linux-ingbuild-x86_64-15692 
> 
> I asked because the way things are done is slightly different. 
> 
> Did you find the service file in $II_SYSTEM/ingres/files/rcfiles? 
> 
> During the installation (either type) the service file first gets created and then gets installed. Your original error implies it was not installed but it would be interesting to know whether it failed getting created or just installed. That's why I asked about having the output from the terminal when you installed. 
> 
> As I said before you should be able to install the service manually if you want it. A fix may be needed to the install process but you probably don't want to re-install Actian X just to get the service working. 
> 
> When I get the time I'll try the install on Suse 15.2 myself and see if I can reproduce it. If you want to pursue this then you may want to open a Support issue. 
> 
> Regards
> Paul 
> 
> -----Original Message----- 
> From: info-ingr... at lists.planetingres.org <info-ingr... at lists.planetingres.org> On Behalf Of Rich Ford 
> Sent: 03 December 2021 15:26 
> To: info-... at lists.planetingres.org 
> Subject: Re: [Info-ingres] Ingres Installation 
> 
> On Friday, 3 December 2021 at 07:17:55 UTC-8, Rich Ford wrote: 
> > On Friday, 3 December 2021 at 01:24:10 UTC-8, Paul Mason wrote: 
> > > Hi Rich, 
> > > 
> > > This is an error trying to start the Ingres service. It gets installed as part of the installation. 
> > > 
> > > If you don't care about starting Ingres as a service then it's not a show stopper. If you do then you can install it manually (see below) 
> > > 
> > > A few questions: 
> > > 
> > > What version of Suse is this? 
> > > 
> > > Was this the rpm saveset or the ingbuild one? 
> > > 
> > > Was it an upgrade? 
> > > 
> > > Check whether you have the file $II_SYSTEM/ingres/files/rcfiles/ingresII.service. If you do you can manually install it with: 
> > > 
> > > mksystemd -i 
> > > 
> > > as root. 
> > > 
> > > If you still have the output of the install terminal session it would be interesting to see if there are any errors relating to systemd. 
> > > 
> > > Thanks 
> > > Paul 
> > > -----Original Message----- 
> > > From: info-ingr... at lists.planetingres.org <info-ingr... at lists.planetingres.org> On Behalf Of Rich Ford 
> > > Sent: 03 December 2021 03:44 
> > > To: info-... at lists.planetingres.org 
> > > Subject: [Info-ingres] Ingres Installation 
> > > 
> > > I just installed 11.2 on SuSe 
> > > 
> > > express_install.sh -licdir /ingres/license -interactive -no32bit 
> > > 
> > > but got this error at the end: 
> > > 
> > > redirecting to systemctl start ingresII.service 
> > > Failed to start ingresII.service: Unit ingresII.service not found. 
> > > 
> > > Is there a fix for this? 
> > > 
> > > Rich 
> > > _______________________________________________ 
> > > Info-ingres mailing list 
> > > Info-... at lists.planetingres.org 
> > > https://lists.planetingres.org/mailman/listinfo/info-ingres 
> > 1) OS version is 15.2 
> > 2) Not sure of the distinction between saveset or inbuild. 
> > I downloaded from Actian: 
> > actianx-11.1.0-100-com-linux-rpm-x86_64-15692 
> > 3) New installation 
> > 
> > Thanks, 
> > Rich 
> 
> Yes it's ingbuild called from running express_install.sh. 
> install/ingbuild 
> _______________________________________________ 
> Info-ingres mailing list 
> Info-... at lists.planetingres.org 
> https://lists.planetingres.org/mailman/listinfo/info-ingres

I checked but there is no ingresII.service file.